The Linktropy 8510 WAN emulator simulates wide-area network bandwidth, delay, jitter, packet loss, congestion, and other important link impairments at speeds of up to 1 Gbps per link. The Linktropy 8510 can emulate up to 4 separate individual links simultaneously at full line rate to an aggregate throughput of 8 Gbps, making it ideal for both multi-link configurations and multi-user labs. The compact 1U-sized appliance is available with either copper RJ45 or fiber SFP Gigabit Ethernet interfaces.
The Linktropy 8510 emulates terrestrial, wireless, satellite, internet and other wide area networks to test applications under a spectrum of real-world conditions. Through an intuitive, browser-based graphical interface, you can install the Linktropy 8510 and begin testing within minutes.
The Linktropy 8510 extends gigabit speed performance across multiple links, ideal for multi-link configurations.
The Linktropy 8510 WAN emulator is a snap to install and configure. Just plug in the Ethernet cables, specify your link conditions, and begin the emulation. No software to install, no training needed. The Linktropy GUI combines the responsiveness of an application with the convenience of a standard web browser.
Emulate WAN bandwidths up to 1 Gbps in each direction per link across 4 separate links to an aggregate of 8 Gbps at full line rate of approximately 12 million packets per second. Versions also available with maximum emulation speeds of 10 Mbps, 45 Mbps and 100 Mbps for users who do not need the full gigabit capacity.
With the ability to emulate 4 separate, independent links, the Linktropy 8510 is a compact and cost-effective alternative to multiple WAN emulation appliances. Independent pairs of Ethernet interfaces for each link make configuration of multiple links as easy as a single link.
Emulate latency from 1 millisecond up to 10 seconds in each direction in a constant, normal, or uniform distribution, or replay latency conditions captured from the live network.
Specify loss as a packet loss rate, bit error rate, or both.
Determine the effects of congestion on bandwidth and jitter-sensitive applications by utilizing Linktropy's background traffic emulation.
Verify that applications properly handle anomalous packet reordering and duplication conditions without inducing stability or performance problems. Adjust the framing overhead and maximum queue depth to match real link behavior.
Test with Ethernet frames of up to 9 KB.
Capture live network conditions with the Linktropy Recorder and replay them through the Linktropy WAN emulator to reproduce the varying characteristics of the production network in a repeatable test environment.
See a visual display of the current traffic, including throughput graphs and link statistics. Download up to 24 hours of statistics for analysis.
The Linktropy 8510 is available with 8 copper RJ45 Gigabit Ethernet ports, 8 SFP Gigabit Ethernet ports, or 4 of each, for convenient installation on copper or fiber-based networks.
Install the Linktropy 8510 as either a bridge or router for easy integration with any test configuration.
Take advantage of the Linktropy Scheduler or the command line interface to automate a series of tests.
Test with confidence - Linktropy WAN emulators offer unsurpassed precision to ensure accurate and reproducible results.
Everything you need is included in the compact, 1U rack-mountable Linktropy 8510. No additional hardware or software is required.
You have to ensure that the networking equipment, software, and client/server applications you develop will work under any customer conditions. With the ability to emulate 4 independent links, the Linktropy 8510 allows 4 individual developers to use the device simultaneously.
With 4 separate, independent links, the Linktropy 8510 allows the QA team to run 4 sets of tests in parallel, saving time and money.
You need to demonstrate your products to customers under a variety of different network conditions. The Linktropy 8510 allows you to run 4 tests in parallel to demonstrate performance of WAN accelerators, load balancers, VPNs, and other networking equipment.
The Linktropy 8510 allows you to test 4 separate products in parallel through independent links, providing a direct comparison between competing solutions for video, voice, and other networking applications.
You have to choose between terrestrial, wireless, satellite, and other WAN technologies to connect offices across the globe. The cost trade-offs are easy to quantify, but how do differing delay, jitter, and loss affect performance of critical applications? Dial-in different conditions and demonstrate performance to all decision makers before a choice is made.
Your applications aren't performing well and you need to find out why. Use the Linktropy 8510 in the lab to help pinpoint the cause of the problem and validate solutions without disrupting the production network.
Voice over IP sounds perfect in demonstrations on the LAN, but quality degrades with latency, jitter and packet loss. Test VoIP under real-world conditions to verify that it meets your quality requirements before you deploy.
Video and television are moving to IP networks, but how will they look with loss and congestion on the link? Use the Linktropy 8510 to help ensure a clear picture.
The Linktropy 8510 is configured through an intuitive, easy-to-use, browser-based interface. Screen shots for the main Configuration Window and the Linktropy Monitor are shown below.
Configuration Window with Link Emulation Tab (click to enlarge)
Linktropy Monitor (click to enlarge)
Use the Linktropy 8510 WAN Emulator to find the most cost-efficient WAN technology to meet your performance requirements.
Terrestrial: Emulate the bandwidth, delay, and loss characteristics of T1, E1, T3, E3, OC-3, ATM, xDSL, Frame Relay, and dialup modems. Determine how much bandwidth you need to keep your applications running smoothly.
Wireless: Mobile wireless networks offer great convenience for professionals on the road, while fixed wireless can be a boon for disperse communities, but performance may not match terrestrial options. Use Linktropy to find out if a wireless solution fits your needs.
Internet: What happens to e-commerce connections when the internet is busy? What happens to the quality of your VoIP calls? Use Linktropy to find out beforehand and plan appropriate countermeasures.
Satellite: With latency in excess of 500 ms and bit error rates as high as 1x10-6, satellite networks can create havoc for protocols and applications. Linktropy WAN Emulators were especially designed to accommodate the long delays and high error rates of satellite networks, and include the ability to simulate bit errors in addition to packet loss.
|Max. Link Emulation Speed||Available in 10 Mbps, 45 Mbps, 100 Mbps, and 1 Gbps versions. Emulate any speed up to licensed maximum.|
|Emulated Links||4 links|
|Max. Aggregate Throughput||8 Gbps|
|Maximum Packet Rate||1.488 million packets per second per port (full line rate)
11.9 million packets per second aggregate
|Maximum Frame Size||9 KB|
|Bandwidth||300 bps - maximum license rate in 1 bps increments|
|Delay||0 ms - 10 sec. in 0.1 ms increments;
constant, uniform, normal distributions
|Packet Loss Rate||0-100% in increments of 0.0001%|
|Background Traffic||0-100% in increments of 0.1%|
|Additional Parameters||Bit Error Rate, Packet Reordering, Packet Duplication,
Queue Depth, Framing Overhead,
Linktropy Scheduler for emulating dynamic WAN conditions
|Emulation||8 Gigabit Ethernet (8 copper, 8 SFP, or 4 of each)|
|Management||1x Gigabit Ethernet
1x RS-232 serial console
|Environmental and Physical Specifications|
|AC Input Voltage||Auto ranging 100 VAC to 240 VAC|
|AC Input Frequency||50 to 60 Hz|
|AC Input Current||1.0 A|
|Power Draw||120 Watts|
22" D x 17.0" W x 1.75" H (1 RU)
56 cm D x 43 cm W x 4.4 cm H (1 RU)
29" D x 23" W x 8" H
73 cm D x 58 cm W x 20 cm H
18 lbs. (8 kg)
29 lbs. (14 kg)
32° to 104°F (0° to 40°C)
-4° to 158°F (-20° to 70°C)
|Humidity||5% to 95% (non-condensing)|
|Certifications||FCC, CE, RoHS|
|Warranty & Support|
|Hardware Warranty||1 year|
|Support and Maintenance||1 year, including all firmware upgrades|
|Part Numbers|| 10 Mbps version: L8510-10M
45 Mbps version: L8510-45M
100 Mbps version: L8510-100M
1 Gbps version: L8510-1G
|SFP ports option||unit comes standard with 8 RJ45 ports for emulation
L8510-SFP: 8 SFP ports
L8510-C4S4: 4 SFP ports and 4 RJ45 ports